Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: AVR setup

AVR setup 1 year 1 month ago #21905

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Senior Boarder
  • Posts: 70
  • Thank you received: 21
  • Karma: 0
While performing a Dirac Live calibration, all other processing must be turned off. In particular, be sure to turn
off:
 Up-mixing such as surround-sound simulators
 Surround decoders such as Dolby Pro Logic
 “Effects” such as hall or ambience simulators

So from this info should my MARANTZ 6009 be set to STEREO output ? Obviously w Audessy correction turned off...
The administrator has disabled public write access.

AVR setup 1 year 1 month ago #21908

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 861
  • Karma: 99
No, you still want multichannel audio going through it, what you don't want is the AVR moving signal between channels.

(OK, except for bass management.)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 1 year 1 month ago by john.reekie.
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

AVR setup 1 year 1 month ago #21932

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Senior Boarder
  • Posts: 70
  • Thank you received: 21
  • Karma: 0
so is AUTO decode the best setting for the MARANTZ ?
The administrator has disabled public write access.

AVR setup 1 year 1 month ago #21933

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 861
  • Karma: 99
From the manual, it looks like Direct or Pure Direct would be best.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Time to create page: 0.104 seconds