Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)
  • Page:
  • 1
  • 2

TOPIC: Nano AVR DL

Nano AVR DL 1 year 1 month ago #21632

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
When using the Nano AVR DL do you use Audyssey before or after or not at all?
Last Edit: 1 year 1 month ago by jacobariel.
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21641

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
I think "not at all" would be the most likely answer... if you ran Audyssey first, then Dirac will do its thing and you will end up with the same result as not using Audyssey. If you ran Dirac first and then Audyssey, the Dirac calibration will then be messed up.

HTH :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21644

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
Is the Nano AVR DL easy to use?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21657

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
Pretty much, the only hard thing (IMO) is getting your head around where to put the microphone for all nine measurements. But it's all explained in the manual, maybe have a read through it and see what you think?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21659

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
Thank you. Now I already own the umik 1 and I have a file on the pc. The manual also asks to download the 90 degree file too. How do I find it or do it for the 90 degree one?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21663

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
Hi again, you get the 90 degree file from the UMIK-1 page - www.minidsp.com/products/acoustic-measurement/umik-1
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: jacobariel

Nano AVR DL 1 year 1 month ago #21665

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
john.reekie wrote:
Hi again, you get the 90 degree file from the UMIK-1 page - www.minidsp.com/products/acoustic-measurement/umik-1
ok from what I read. If you installed the umik mic with serial info the 90 degree was installed too, yes?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21666

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
You enter your serial number on the UMIK-1 page. You should get two files downloaded. If not, there will be links appear to download directly. I just did it for mine, this is what it looks like:


This message has an attachment image.
Please log in or register to see it.

I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21668

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
john.reekie wrote:
You enter your serial number on the UMIK-1 page. You should get two files downloaded. If not, there will be links appear to download directly. I just did it for mine, this is what it looks like:


Ok thank you! Sorry I am asking too many questions. I haven't received the Nano yet but I am doing some homework to avoid some steps in case something comes up. I have been reading the online manual.
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21674

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
Does the nano pass 2.0 and 2.2 hdmi for 4k and hdcp?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21675

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
No, it's HDMI 1.4a (per specifications in manual ;) )
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21676

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
john.reekie wrote:
No, it's HDMI 1.4a (per specifications in manual ;) )
Basically it won't pass it even if the avr is 2.0, 2.2?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21677

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
[Edit] Sorry my mistake. 4k should pass through, since it is part of the 1.4 specification. I've never tried it. However, you asked if HDMI 2.0 and 2.2 would work. (You did mean the HDMI spec and not the number of channels there - ?) My guess is not, since the nano is a 1.4 device. 2.x is supposed to be backwards compatible, but exactly what that means... well, for a definitive answer, devteam would have to supply that.

Cheers :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 1 year 1 month ago by john.reekie.
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21678

  • jacobariel
  • jacobariel's Avatar
  • Offline
  • Junior Boarder
  • Posts: 29
  • Karma: 0
john.reekie wrote:
I would assume that the nanoAVR won't pass through 4k, since 4k is a 2.0 feature and the nano is a 1.4 device. For a definitive answer, devteam would have to supply that. It does support HDCP.

Cheers :)
ok thanks. Also you won't be able to do bitstream only PCM. Why would they do that? Won't the quality degrade plus what happens to Atmos?
The administrator has disabled public write access.

Nano AVR DL 1 year 1 month ago #21680

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2279
  • Thank you received: 853
  • Karma: 99
Sorry, see my correction above.

I don't understand the last question.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.155 seconds