Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: RGB Color space issue with nanoAVR-HD

RGB Color space issue with nanoAVR-HD 1 year 1 month ago #21593

  • Tch0rT
  • Tch0rT's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 1
  • Karma: 0
My nanoAVR-HD is skewing the RGB color space but it passes YCbCr just fine. My source is an HTPC with an AMD APU A8-6500 w/HD8570D. When I switch to RGB 4:4:4 Full or RGB 4:4:4 Limited the color space shifts.

RGB with miniDSP nanoAVR-HD in the signal path:
dl.dropbox.com/s/xe0pt02zv20o0g8/wd73640-rgb.png?dl=0

YCbCr with miniDSP nanoAVR-HD in the signal path:
dl.dropbox.com/s/bwfib0r1onkfksq/wd73640-yuv.png?dl=0

EDIT: Looks like I can't embed the Dropbox pic links.

I don't have any measurements without the miniDSP nanoAVR-HD in the signal path however it's easy enough to tell since 100% red on my test patterns show up as orange-red when my HTPC is set to RGB Full or Limited when the nanoAVR-HD in the signal path I then disconnected the miniDSP nanoAVR-HD and now 100% red pattern looks like red and no hint of orange. When I swap back to YCbCr without the miniDSP nanoAVR-HD in the signal path then 100% red is orange-red.
Last Edit: 1 year 1 month ago by Tch0rT.
The administrator has disabled public write access.

RGB Color space issue with nanoAVR-HD 1 year 1 month ago #21610

  • Tch0rT
  • Tch0rT's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 1
  • Karma: 0
Just in case someone else has this happen to them I got a reply from miniDSP about it. I need to update the firmware. I thought I was on the latest one but was mistaken. I'll update the firmware asap and report back.
The administrator has disabled public write access.

RGB Color space issue with nanoAVR-HD 1 year 1 month ago #21714

  • Tch0rT
  • Tch0rT's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 1
  • Karma: 0
Upgrading the firmware fixed my problem. :)
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

RGB Color space issue with nanoAVR-HD 1 year 1 month ago #21750

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5095
  • Thank you received: 629
  • Karma: 119
Glad to hear that you're all set. :-)

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.169 seconds