Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: total nanoAVR HD newbie looking for some advice...

total nanoAVR HD newbie looking for some advice... 1 year 3 months ago #20842

  • Carmine
  • Carmine's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hey guys, I just received my nanoavr HD about a week ago and started taking measurements using REW. I was wondering if anyone might be willing to give me some assistance in smoothing out my frequency response. Below are the measurements I have have taken from my main listening position. My associated equipment is as follows: Outlaw Audio Model 5000 Amp, Outlaw Audio Model 975 pre/pro, iMac computer with REW and Soundflower & a Umik-1 mic. I'm also looking for some advice as to what would make my Sub start to "drop" off at 47Hz??? All speakers are set to "Large" within Model 975 pre. Thanks so very much guys!!!
Attachments:
Last Edit: 1 year 3 months ago by Carmine.
The administrator has disabled public write access.

total nanoAVR HD newbie looking for some advice... 1 year 3 months ago #20849

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 859
  • Karma: 99
Hi, your question is a bit open-ended... :) One suggestion would be to turn off smoothing for the sub measurement. Have you read the app notes:

www.minidsp.com/applications/home-theate...ization-with-nanoavr
www.minidsp.com/applications/home-theate...ning/bass-management

HTH :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

total nanoAVR HD newbie looking for some advice... 1 year 3 months ago #20850

  • Carmine
  • Carmine's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Hey John, thank you so much for the reply!!! I have downloaded & read the app notes but a lot of it is still a bit "new" to me. I will use your suggestion in turning off smoothing for my sub & re-post.

Thank you again & appreciate any assistance you are willing to provide
The administrator has disabled public write access.

total nanoAVR HD newbie looking for some advice... 1 year 3 months ago #20851

  • Carmine
  • Carmine's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Subwoofer measurement with smoothing removed....
Attachments:
The administrator has disabled public write access.

total nanoAVR HD newbie looking for some advice... 1 year 3 months ago #20859

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 859
  • Karma: 99
Is your sub in a corner? I would suggest trying some different locations and see what happens. If it simply can't be moved, you'll need to work with what you have.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
Time to create page: 0.123 seconds