Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Has this been fixed yet?

Has this been fixed yet? 1 year 6 months ago #19388

  • SOWK
  • SOWK's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Karma: 0
MiniDSP nanoAVR is locked to 7.1 output no matter your output configuration.

*Suggested FIX*
The unit needs to output 2 channel / 5.1 channel / 7.1 channel

Examples:


MiniDSP NanoAVR should only output 2 channels (Receiver or processor should only see a 2 channel source, not 7.1)


MiniDSP NanoAVR should only output 5.1 channels (Receiver or processor should only see a 5.1 channel source, not 7.1)


MiniDSP NanoAVR should output 7.1 channels (like it currently does)

*With any "OTHER" configuration the MiniDSP NanoAVR should output 7.1 channels as a fail safe.

I have had my theater room apart for a long time and will be putting it back together soon and wanted to know if this has been fixed yet?
The administrator has disabled public write access.

Has this been fixed yet? 1 year 6 months ago #19390

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2287
  • Thank you received: 863
  • Karma: 99
If you update your plugin, you'll see that you can set the HDMI output mode to 2, 4, 6, or 8 channels, or to Auto. In Auto mode, the number of output channels is signalled the same as the number of input channels. AFAIK it's independent of the routing table.

PS. I believe the onboard firmware will need to be updated as well. The firmware file and instructions should be in the download.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 1 year 6 months ago by john.reekie.
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

Has this been fixed yet? 1 year 6 months ago #19396

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5132
  • Thank you received: 632
  • Karma: 119
@ SWOK,

You're running both an old version of plug-in AND a very old version of the firmware. These were indeed fixed a long time ago as suggested by John.
Please go to your user downloads, update the firmware as per manual, update your plug-in (you'll loose settings so need to do again) and have a trial at the HDMI mode.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.139 seconds