Welcome, Guest
Username: Password: Remember me
Main forum for support questions you may have for the community. Post your issues and we'll all try to help resolve them.

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: DDRC-24 - 4 Channel Input / 2 Channel Output

DDRC-24 - 4 Channel Input / 2 Channel Output 4 days 7 hours ago #44913

  • pbbean
  • pbbean's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Hi - First time poster. I've had the DDRC-24 for a week. I noticed in miniDSP control panel, it says Input 4 channels and output 2 channels (picture attached). I would think it would be the opposite because I have all 4 outputs (left front, right front, sub1, and sub2). My understanding was that the USB input is 2 channel and then I use all 4 ouputs so I'd expect output to 4 channels. Am I misunderstanding something or is it setup incorrectly? Much thanks for any input or guidance.
The administrator has disabled public write access.

DDRC-24 - 4 Channel Input / 2 Channel Output 3 days 18 hours ago #44916

  • john.reekie
  • john.reekie's Avatar
  • Online
  • Platinum Boarder
  • Posts: 3506
  • Thank you received: 1510
  • Karma: 138
The four output channels of the 2x4 HD go to the analog outputs, and also via USB to the PC. While they are outputs from the 2x4 HD, they are inputs to the PC.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
Moderators: devteam