Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: miniSharc - 3,3V pin - current avaiable on header

miniSharc - 3,3V pin - current avaiable on header 5 months 1 week ago #43902

  • rogiuele
  • rogiuele's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
Hi,

I'm building a buffer for the miniSharc I2S output, I'll use two 74LVC245. I would like to use pin 22 or 24 which provides 3.3v present on the miniSharc. Unfortunately I did not find in the manual how much current the miniSharc can provide, so the question is: can I power two 74LVC245 directly from the miniSharc?
Thanks

Francesco
The administrator has disabled public write access.

miniSharc - 3,3V pin - current avaiable on header 4 months 3 weeks ago #44177

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8704
  • Thank you received: 1101
  • Karma: 158
@Francesco

Sure, it will be fine for these simple 2 buffers.

DevTeam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam