Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Community Support
Hardware
noise on miniDIGI & miniDSP2x4 output

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.
  • Page:
  • 1

TOPIC:

noise on miniDIGI & miniDSP2x4 output 5 years 6 months ago #35960

  • Ultimateroadwarrior9
  • Ultimateroadwarrior9's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 3
DevTeam, you're very active here which is great to see.

So I post a question which is hopefully a quick fix.

I'm using miniDIGI ontop of miniDSP2x4. I chose the miniDIGI for Toslink input and also Toslink thru/output.
I set the jumper on miniDIGI for Toslink1 input and finally heard sound but alot of noise. According to the small troubleshooting guide the boards may not be in sync. Can you provide more insight?

EDIT:
The noise is the same whether USB powered or external power (19VDC).
Using the 4WAY crossover ADV plugin.

BTW, sorry to see miniDIGI is EOL. Seems like a nice companion to the miniDSP board.

Please Log in or Create an account to join the conversation.

Last edit: by Ultimateroadwarrior9.

noise on miniDIGI & miniDSP2x4 output 5 years 6 months ago #35969

  • Ultimateroadwarrior9
  • Ultimateroadwarrior9's Avatar Topic Author
  • Offline
  • New Member
  • New Member
  • Posts: 17
  • Thank you received: 3
Ah, got it! Woohoo! Sounds great!! I set the MCLK to slave on the miniDSP board.

I need 5 more miniDIGI's, what am I going to do now?
The following user(s) said Thank You: devteam

Please Log in or Create an account to join the conversation.

noise on miniDIGI & miniDSP2x4 output 5 years 6 months ago #35992

  • devteam
  • devteam's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 9173
  • Thank you received: 1480
Great to hear that you figured it out.. :-)
Jumper is indeed the typical cause..

As for the miniDIGI, I'm afraid that it's indeed EOL since 2017.. we ran out of stock already and don't plan to build a new batch as it wasn't selling much.. Some of our dealers still might have some of stock though. Worth hunting?

DevTeam
miniDSP, building a DSP community one board at a time.

For any official support, please contact our technical support team directly @ support.minidsp.com/support/home

Please Log in or Create an account to join the conversation.
  • Page:
  • 1
Moderators: devteam
Forum
Community Support
Hardware
noise on miniDIGI & miniDSP2x4 output