TOPIC: Subwoofer reading

Subwoofer reading 3 years 3 months ago #20540

sivakumar Offline Fresh Boarder Posts: 6 Karma: 0	Dear all Attached my sub woofer measurement file phase & water fall.. What room treatment required. Thanks S.Sivakumar Attachments: ...ram.jpg (59KB) ...all.jpg (87KB)
	Last Edit: 3 years 3 months ago by sivakumar. Reason: Attachment missing The administrator has disabled public write access.

Subwoofer reading 3 years 3 months ago #20541

john.reekie
Offline
Platinum Boarder
Posts: 3172
Thank you received: 1366
Karma: 128

Hi, you have a fairly substantial resonance at 35 Hz or so, which is fairly difficult to address. My suggestion would be to first try repositioning your sub to see if the tail can be reduced. Assuming that it's the room fundamental, positioning at the midpoint of the longest wall might work. Two subs at the midpoints of both long walls might work even better. Whatever result you get then, add an EQ band there to reduce the excitation signal.

I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?

The administrator has disabled public write access.

The following user(s) said Thank You: devteam

Re:Subwoofer reading 3 years 3 months ago #20543

sivakumar Offline Fresh Boarder Posts: 6 Karma: 0	Thanks Mr.john. i will try and update you... i didn't use bass traps. . Will be there any change used. Thanks Sent from my SM-N750 using Tapatalk
	The administrator has disabled public write access.

Moderators: devteam

Forum

Tutorials - Community powered

System equalization

Subwoofer reading

Time to create page: 0.107 seconds