Welcome, Guest
Username: Password: Remember me

TOPIC: Use "2-way-advanced" as a 20-band per channel PEQ

Use "2-way-advanced" as a 20-band per channel PEQ 8 years 5 months ago #5171

  • bmmoser
  • bmmoser's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 11
  • Karma: -1
I have been experimenting with REW software and a MiniDSP "2x4" and I just bought the 2-way-advanced plug-in so I could load parameter sets from REW. REW thinks that MiniDSP only will take 6 PEQs. Yes, and no. I'm not 100% sure of my approach, but it seems to work: If you are going to just use the "2x4" as a stereo EQ, then each of two channels will have up to 20 PEQ available: 6 on input, 6 on output, and I think you can use the "crossover" as an 8-band PEQ isntead. If you are lazy, you can use REW to compute three different parameter sets and then you cut & Paste them into the appropriate section of the plug-in. Or, a bit more work, you can use the biquad calculator of the plug-in. Based on my initial trial, this seems to work OK.
The administrator has disabled public write access.
Moderators: devteam