Welcome, Guest
Username: Password: Remember me

TOPIC: nanodigi with sabre es9018s DAC

nanodigi with sabre es9018s DAC 4 years 7 months ago #23502

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1

This message has an attachment image.
Please log in or register to see it.

Last Edit: 4 years 7 months ago by kelvink.
The administrator has disabled public write access.
The following user(s) said Thank You: Amnes, Alex.vyverman, Masson

nanodigi with sabre es9018s DAC 4 years 7 months ago #23503

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1
Attachments:
Last Edit: 4 years 7 months ago by kelvink.
The administrator has disabled public write access.

nanodigi with sabre es9018s DAC 4 years 7 months ago #23505

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1
the nanodigi with sabre es9018s DAC is wonderful , this diy project is for high quality professional use ,with high efficiency speaker ; ( replacing the dcx2496)

and drive the beyma tpl150H with out the back cover ,very good sound ...
The administrator has disabled public write access.

nanodigi with sabre es9018s DAC 4 years 7 months ago #23566

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1
the output stage has been amended, following the differential scheme of ess
The administrator has disabled public write access.

nanodigi with sabre es9018s DAC 4 years 7 months ago #23567

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1
the output stage has been amended, following the differential scheme of ess

This message has an attachment image.
Please log in or register to see it.

The administrator has disabled public write access.

nanodigi with sabre es9018s DAC 4 years 7 months ago #23639

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8757
  • Thank you received: 1140
  • Karma: 163
@ kelvin,

What a great setup! How did you wire this all up? SPDIF in to all modules?
we've put your great unit on the gallery btw.. :-)

DevTeam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.
The following user(s) said Thank You: Masson

nanodigi with sabre es9018s DAC 4 years 7 months ago #23662

  • kelvink
  • kelvink's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Thank you received: 4
  • Karma: 1
tankyou !,

the mini dsp nano are use with the original spdif because the pcb with only standalone mode for the es9018
are the least expensive .. it's also easier to integrate into the case because the module is narrower ,the SPDIF signal with this DAC is really perfectly treaty thanks the "jiiter Eliminator"
I improved the powersuply , vref and aop powersupply etc..
my brother had very limited budget, later I would build the device for my use .. when my audio room finished ...,
I'll integrated with music server (Daphile audio os + mini ITX motherboard) the mini dsp shark, with 4 i2s output and 3 separate ess dac , there will be much less cost compromise :)





Kelvink Raphael

This message has an attachment image.
Please log in or register to see it.

The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Moderators: devteam