Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: [Solved] No sound output on DDRC-24

[Solved] No sound output on DDRC-24 1 month 1 week ago #54440

  • jeeyi345
  • jeeyi345's Avatar
  • Online
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I purchased an used DDRC-24, the software / drivers / Dirac Live are all installed.
My speaker is connected to the 1, 2 output of DDRC-24.

I followed the chapter 9.2 TROUBLE-SHOOTING PLAYBACK ISSUES of "miniDSP DDRC-24 User Manual" but cannot solved the problem.

Here're the steps I took:

1. In the DDRC-24 software, there is no signal on the input meters when software started.


2. When I clicked "connect" the software found DDRC-24, an popup "Bridge" showed, and windows has playback, there is signal on the input meters, but no sound output on my speakers.


there is signal on the output meters (138 and changing when playback, 189 when no playback.)


but still no sound, and I've checked my speaker, the cable works when connected to cellphone (with a RCA - aux adapter).

I have a remote control, it works only when I clicked "connect" on DDRC-24 software, and if I close the popup "Bridge", there will be no playback detected, like in 2nd picture.

Please help me with this situation, thank you!
Last Edit: 1 month 2 days ago by jeeyi345.
The administrator has disabled public write access.

No sound output on DDRC-24 1 month 1 week ago #54441

  • asx77
  • asx77's Avatar
  • Offline
  • Gold Boarder
  • Posts: 271
  • Thank you received: 26
  • Karma: 3
Hi,
I’ve had a similar problems which have stemmed from changing Crossover settings. The only way I fixed it was to reset the configuration to default.
The administrator has disabled public write access.

No sound output on DDRC-24 1 month 1 week ago #54442

  • jeeyi345
  • jeeyi345's Avatar
  • Online
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hi,
Thank you for sharing your experience, just that I tried to reset twice, but it didn't work in my case.
The administrator has disabled public write access.

No sound output on DDRC-24 1 month 1 week ago #54445

  • asx77
  • asx77's Avatar
  • Offline
  • Gold Boarder
  • Posts: 271
  • Thank you received: 26
  • Karma: 3
Silly question but in your screenshots the master volume is at -95db. You won’t hear anything at that volume. Try increasing it!
The administrator has disabled public write access.
The following user(s) said Thank You: jeeyi345

No sound output on DDRC-24 1 month 1 week ago #54464

  • jeeyi345
  • jeeyi345's Avatar
  • Online
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
You're right! There is sound output after adjusting the dB. I wasn't sure what it does to the device so I left it there. Silly me!
Last Edit: 1 month 1 week ago by jeeyi345.
The administrator has disabled public write access.

No sound output on DDRC-24 1 month 2 days ago #54572

  • ck42
  • ck42's Avatar
  • Online
  • Fresh Boarder
  • Posts: 19
  • Thank you received: 1
  • Karma: 0
Delete
Last Edit: 1 month 2 days ago by ck42.
The administrator has disabled public write access.

No sound output on DDRC-24 1 month 2 days ago #54576

  • jeeyi345
  • jeeyi345's Avatar
  • Online
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
No, I can't delete post. Change title instead.
Ok delete later. I did encountered some other muted situation, usually refresh DSP settings / reset / mute & unmute can solve
Last Edit: 1 month 2 days ago by jeeyi345.
The administrator has disabled public write access.
Moderators: devteam