Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: DDRC-88A missing channels after updates

DDRC-88A missing channels after updates 2 weeks 2 days ago #48382

  • jacked
  • jacked's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi All,

I`ve updated my DDRC-88A firmware and installed the current version of Dirac Live from my user downloads, my pc had a hard-drive change about 2-3 years ago so the Dirac Live and unit firmware has not been updated in that time.

I have a problem with the sound only coming from front left speaker on the Dirac Live channel levels screen, whatever channel I select on an 8 channel setup the test tone only plays through the front left. If I bypass and try the test tones on my Marantz all the channels play correctly so I know all the cabling is still working.

Has anyone come across this please ?

Thanks,
Dave
The administrator has disabled public write access.

DDRC-88A missing channels after updates 2 weeks 2 days ago #48396

  • jacked
  • jacked's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
So just to clarify what`s happening, I have 2 x DDRC-88A units that have both been updated, reset to defaults and DSP reloaded etc.

Only channel 1 plays a test tone on Dirac Live, so if it`s the bed layer it`s front left, if it`s for Atmos it`s top front left.
Any other channel selected and sound comes from channel 1 only, this is the same for either DDRC-88A and whatever layout is selected, 5.1,7.1 or custom etc

I don`t understand this at all.

Thanks,
Dave
The administrator has disabled public write access.

DDRC-88A missing channels after updates 1 week 4 days ago #48467

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Gold Boarder
  • Posts: 168
  • Thank you received: 36
  • Karma: 0
Uninstall Dirac Live Calibration / restart / reinstall
Use something like Revo Unistaller to make certain that all files are being deleted...be careful of the registry tree / only delete BOLD
The administrator has disabled public write access.

DDRC-88A missing channels after updates 1 week 4 days ago #48468

  • rts100x5
  • rts100x5's Avatar
  • Offline
  • Gold Boarder
  • Posts: 168
  • Thank you received: 36
  • Karma: 0
Uninstall Dirac Live Calibration / restart / reinstall
Use something like Revo Uninstaller to make certain that all files are being deleted...be careful of the registry tree / only delete BOLD
The administrator has disabled public write access.
The following user(s) said Thank You: jacked
Moderators: devteam