Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: stands

stands 4 months 1 week ago #47443

  • johnb33
  • johnb33's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
I am pretty new to dirac live as was hopeing to get a link or suggestions for a microphone stand with a boom arm for the mini, also a little confused on which way the microphone should be placed for a 2 channel system- 90 degrees or 0? thank you
The administrator has disabled public write access.

stands 4 months 1 week ago #47446

  • Tomas60
  • Tomas60's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
everything is here:
This is a link
Product Downloads: Dirac 2.0 Addendum for information on how to use Dirac 2.0
The administrator has disabled public write access.

stands 4 months 1 week ago #47454

  • johnb33
  • johnb33's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
I didn't see a microphone stand in there
The administrator has disabled public write access.

stands 4 months 1 week ago #47456

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3772
  • Thank you received: 1584
  • Karma: 141
Amazon have one for like $17, for higher quality look at Konig and Mayer, I like the model 252 because it gets quite low (for nearfield sub measurements) and has extendable boom.

But almost anything will work fine for DL :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

stands 4 months 1 week ago #47461

  • Stephen300
  • Stephen300's Avatar
  • Offline
  • Senior Boarder
  • Posts: 61
  • Thank you received: 7
  • Karma: 1
I'm using the one mentioned by John above. Works great and didn't break the bank.

www.amazon.com/gp/product/B003CLIPHO/ref..._title?ie=UTF8&psc=1
The administrator has disabled public write access.

stands 4 months 1 week ago #47462

  • Ultrasonic
  • Ultrasonic's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 709
  • Thank you received: 133
  • Karma: 14
It would help if you'd put where you live in your profile @johnb33...

I use one of these:

www.studiospares.com/Accessories/Stands-...opic-Boom_648000.htm

I had a cheaper one from Amazon before but its shorter arm was less suited to Dirac but fine for the single point measurements I'd made before.

I use the microphone pointing towards for 2-channel measurements. Pointing at the ceiling is necessary for surround systems.
Last Edit: 4 months 1 week ago by Ultrasonic.
The administrator has disabled public write access.

stands 4 months 1 week ago #47469

  • johnb33
  • johnb33's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
thank you so much
The administrator has disabled public write access.
Moderators: devteam