Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: 2x4HD to DDRC-24 upgrade FAIL!

2x4HD to DDRC-24 upgrade FAIL! 3 days 9 hours ago #42211

  • Stephen300
  • Stephen300's Avatar
  • Offline
  • Junior Boarder
  • Posts: 20
  • Thank you received: 2
  • Karma: 0
So I successfully installed the DDRC-24 upgrade to my 2x4HD. Considering my lack of luck with all things computers this was a HUGE victory for me and my limited computer knowledge. The problem occurs when I try to run the Dirac Live Calibration Tool. When I open the program it recognizes my DDRC. On the next page it asks for a "Recording Device" and "Recording Channel" or something like that. Under "Recording Device" it says NONE. When I click open the menu NONE is the only choice given. No choices are given for the "recording channel". So what am I doing wrong?
The administrator has disabled public write access.

2x4HD to DDRC-24 upgrade FAIL! 3 days 9 hours ago #42212

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3351
  • Thank you received: 1425
  • Karma: 133
Do you have a UMIK-1 connected to the computer?
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

2x4HD to DDRC-24 upgrade FAIL! 3 days 8 hours ago #42213

  • Stephen300
  • Stephen300's Avatar
  • Offline
  • Junior Boarder
  • Posts: 20
  • Thank you received: 2
  • Karma: 0
I have a Dayton Audio UMM-6
The administrator has disabled public write access.

2x4HD to DDRC-24 upgrade FAIL! 3 days 7 hours ago #42214

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3351
  • Thank you received: 1425
  • Karma: 133
Sorry to be the bearer of bad news but you need a UMIK-1.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

2x4HD to DDRC-24 upgrade FAIL! 3 days 7 hours ago #42215

  • Stephen300
  • Stephen300's Avatar
  • Offline
  • Junior Boarder
  • Posts: 20
  • Thank you received: 2
  • Karma: 0
Damn it! I was told the UMM-6 would work fine.
The administrator has disabled public write access.
Moderators: devteam