Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: DDRC-24 - Distortion around 190hz in REW

DDRC-24 - Distortion around 190hz in REW 3 months 4 weeks ago #41939

  • lintoft
  • lintoft's Avatar
  • Offline
  • Junior Boarder
  • Posts: 20
  • Karma: 0
Hi.

At around 35% of the measurement, a strange distortion sets in. This appears when Dirac is activated. I have reset my devices, updated to the latest firmware, redone measurements etc.

Link to video:
imgur.com/P1z9nJa

The issue is not present with Dirac deactivated.

Has anyone here experienced anything similar?

The same issue occurs on two different sets of amps/speakers.

Thanks.
Last Edit: 3 months 4 weeks ago by lintoft.
The administrator has disabled public write access.

DDRC-24 - Distortion around 190hz in REW 3 months 5 days ago #42220

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 8402
  • Thank you received: 1012
  • Karma: 154
@Lintoft

I believe that you already fixed this but just in case, for other, most typical case is when you're overdriving a speaker or the unit. (i.e. too much boost at specific frequency). Make sure to have a lower signal into the DSP.

devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

DDRC-24 - Distortion around 190hz in REW 3 months 5 days ago #42225

  • lintoft
  • lintoft's Avatar
  • Offline
  • Junior Boarder
  • Posts: 20
  • Karma: 0
Yes, I am sorry that I did not update this post.

Lowering the output volume and increasing gain solved the issue.

Thanks again.
The administrator has disabled public write access.
Moderators: devteam