Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Summing/mixing/automatic changingUSB with/to SPDID

Summing/mixing/automatic changingUSB with/to SPDID 7 months 3 days ago #41715

  • steve1225
  • steve1225's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
I use DDRC-24 with computer (over USB) and streamer (Sonos Connect over SPDIF).
My main problem is that I must manually change source of audio using remote control which is inconvinient.

Is there any method in DDRC-24 to summing/mixing two sources (USB and SPDIF) to hear both sources of audio?
If no, is there any method to automate changing source from USB to SPDIF when full PCM signal on SPDIF is detected?
The administrator has disabled public write access.

Summing/mixing/automatic changingUSB with/to SPDID 6 months 1 week ago #42061

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8592
  • Thank you received: 1065
  • Karma: 157

Unfortunately I'm afraid that it's not possible as the DSP structure is 2x4 not 4x4.. :-(
We also don't have an automated way to perform source selection either. Sorry we can't help for these..

MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam