Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Ddrc24 curve after measurement

Ddrc24 curve after measurement 1 year 9 months ago #41467

  • Arnab074
  • Arnab074's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Any body can help out the reason for the curve like attachment after Dirac room measurement. Frequency roll off after 80 hz.
The administrator has disabled public write access.

Ddrc24 curve after measurement 1 year 8 months ago #41806

  • Bencat
  • Bencat's Avatar
  • Offline
  • Senior Boarder
  • Posts: 48
  • Thank you received: 18
  • Karma: 6
Can you advise if you are using the DIRAC live only or are you using the MiniDSP unit as a digital crossover. The sharp drop looks like a crossover setting which is cutting off after that pint fro sound being sent to a Bass / Sub Woofer unit . This does not look like it is taking a full sound sweep for all driver units .

The above is only my best guess and may be well short of what is really happening you need to give details of the equipment used and what exactly you are measuring with DIRAC to enable better help .
The administrator has disabled public write access.
Moderators: devteam