Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: connections after measurements

connections after measurements 3 weeks 3 days ago #40251

  • joegjr1
  • joegjr1's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 1
  • Karma: 0
I've got all the measurements locked and loaded. Do I have to change any connections from or to any components. Not getting any sound. Using computer as source with it connected to preamp using usb. Speakers connected to external amp and sent to preamp via rca. Basically what needs to go to the ddrc24 from the preamp or vice versa ?
The administrator has disabled public write access.

connections after measurements 3 weeks 3 days ago #40253

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3263
  • Thank you received: 1403
  • Karma: 131
Your description is unclear, but have you checked the input source selection on the DDRC24? You shouldn't need to change any connections between Dirac calbration and playing audio.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

connections after measurements 3 weeks 2 days ago #40256

  • joegjr1
  • joegjr1's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 7
  • Thank you received: 1
  • Karma: 0
I just had to change the audio device in JRiver. Thank you, just clearing my doubts allowed me to look elsewhere.

Joe
The administrator has disabled public write access.
The following user(s) said Thank You: john.reekie
Moderators: devteam
Time to create page: 0.099 seconds