Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Gain structure

Gain structure 1 month 2 weeks ago #39951

  • juszat65
  • juszat65's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
I have quick question regarding optimizing gainstructure in a system with the ddrc 88A .

I ran Dirac and reviewing the data i camee to a conclusion that i cam improve the output from the amplifier with the input sensitivity of 1.4 Vrms ( roughly 2 V) if i swith the output of the ddrc 88a frpm 0.9Vto 2V( i am using unbalanced connectors) . Once i am done do i have to ru a new calibration with Dirac or the previous measurments is going to be ok . I am hoping that i will have a roughly +6dB gain by doing the swith if i understood the charts correctly .

The administrator has disabled public write access.

Gain structure 1 month 2 weeks ago #39957

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 3263
  • Thank you received: 1403
  • Karma: 131
As long as all speakers (and subs) are being driven from the DDRC-88A and you change all the switches, you won't need to redo the calibration.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

Gain structure 1 month 1 week ago #40035

  • AustinJerry
  • AustinJerry's Avatar
  • Offline
  • Expert Boarder
  • Posts: 135
  • Thank you received: 30
  • Karma: 10
Have you reviewed the Gain Management section in this guide?

88A setup Guide
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Moderators: devteam
Time to create page: 0.102 seconds