Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: DDRC-24 results

DDRC-24 results 4 weeks 1 day ago #39150

  • engin
  • engin's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
I've used Dirac Live software before.

But since I've retired my computer from my setup, I was left without DRC.

I was using my mixer's GEQ as a temporary solution (just to attenuate two low-end peaks, around ~60 and ~120Hz by ~-15dB using ear).

Finally, I've got the budget for a DDRC-24 and after a few troubles (RCA-XLR cables turns out to be wrongly wired, I've ended up soldering a cable myself)... Here are the results of the room's response.

By the way, the performance of the simple frequency-domain-only GEQ correction surprised me, it was much closer to the Dirac's correction than I've expected it to be.

Anyway, for what it's worth, you can view the L/R/L+R impulse response measurements before and after Dirac here.

Also, a rather bad photo of the tiny studio (it's almost a horrible CUBE! 3m x 3m x 2.7m, a nightmare from an acoustic standpoint), the pale blue dot there is the MiniDSP :)
Attachments:
The administrator has disabled public write access.
Moderators: devteam
Time to create page: 0.114 seconds