Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: change between ddrc-24 and 2x4hd

change between ddrc-24 and 2x4hd 2 years 2 months ago #38200

  • rgbln88
  • rgbln88's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 3
  • Karma: 0
Hi everybody, is it possible to change a DDRC-24 into a 2x4 HD just by applying the Firmwareupdate? I would like to try out both sides of this Device. Is there a Limit? Can it be programmed back and forth, if one has both Plugins? ThankĀ“s for Your Help
The administrator has disabled public write access.

change between ddrc-24 and 2x4hd 2 years 2 months ago #38317

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8767
  • Thank you received: 1156
  • Karma: 165
@ rgbln88

No limit and no problem doing changes. The license is embedded inside the DDRC_24 flash memory.

Grab a 2x4HD, upgrade to DDRC_24 firmware (inside the DDRC-24 zip file), Connect with plugin and restore to default all (i..e will override the DSP), use Dirac live...

Same the other way around (DDRC-24 to 2x4HD)

Have fun!

DevTeam
miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.

change between ddrc-24 and 2x4hd 2 years 1 month ago #38822

  • Tony_J
  • Tony_J's Avatar
  • Offline
  • Senior Boarder
  • Posts: 76
  • Thank you received: 22
  • Karma: 2
Where do I find the firmware for the 2X4 HD to do this?
The administrator has disabled public write access.

change between ddrc-24 and 2x4hd 2 years 1 month ago #38905

  • rgbln88
  • rgbln88's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 3
  • Karma: 0
Hi, just do it as the Devteam recommends: with the reset to default Function using the apropriate Plugin the Firmware will automatically be installed.
(miniDSP 4x4 HD or DDRC-24 Plugins)
Hope this helps :-)
The administrator has disabled public write access.
The following user(s) said Thank You: Tony_J

change between ddrc-24 and 2x4hd 2 years 1 month ago #38906

  • rgbln88
  • rgbln88's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 3
  • Thank you received: 3
  • Karma: 0
Hi, just do it as the Devteam recommends: with the reset to default Function using the apropriate Plugin the Firmware will automatically be installed.
(miniDSP 4x4 HD or DDRC-24 Plugins)
There is no seperate Firmware File.
Hope this helps :-)
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, Tony_J
Moderators: devteam