Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: DDRC-24 Dirac Live after Audyssey

DDRC-24 Dirac Live after Audyssey 2 years 10 months ago #37586

  • audiocrazy
  • audiocrazy's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
I want to run Dirac Live for dual subwoofers only after I have calibrated my Marantz AV7704 processor with Audyssey XT32.

Here is how I connect
AV7704 Sub out 1 & 2 => Input 1 & 2 DDRC-24=> Output 1 to Sub1 and Output 2 to Sub2
I set a Xover of 80hz in Out1&2 linked together.

The problem is when I run Dirac the signal is not sent from my AVR but from MiniDsp. Its BYPASSING my AVR so Dirac calibration is not compensating for Audssyey correction.

Is there a way to accomplish this? If not what's the best way to use Dirac and Audyssey together in this setup.
The administrator has disabled public write access.

DDRC-24 Dirac Live after Audyssey 2 years 9 months ago #37763

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 8849
  • Thank you received: 1242
  • Karma: 167
@ audiocrazy

Well the chain is Marantz (doing audissey) -> DDRC-24 (generating test tones and dirac processing ) - > SUB.
So it's indeed hard for the test tone to pass Audissey being downstream.. :-)

Maybe put the DDRC-24 as an input to your marantz?

miniDSP, building a DSP community one board at a time.
The administrator has disabled public write access.
Moderators: devteam