Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: How to set-up DDRC-2D to avoid filters / pass-thru

How to set-up DDRC-2D to avoid filters / pass-thru 6 days 5 hours ago #34237

  • zydeco
  • zydeco's Avatar
  • Offline
  • Junior Boarder
  • Posts: 23
  • Thank you received: 1
  • Karma: 0
I’ve just got a DDRC-22D and would like to insert it into the system with no correction filters; i.e., unit will just act as a digital switch. Then, when time permits, go through the measurement process. Is this possible and, if so, how? Thanks in advance for the help
The administrator has disabled public write access.

How to set-up DDRC-2D to avoid filters / pass-thru 5 days 12 hours ago #34244

  • pstrisik
  • pstrisik's Avatar
  • Online
  • Fresh Boarder
  • Posts: 17
  • Thank you received: 3
  • Karma: 1
You can set it up including filters and just turn on and off DiracLive correction.
The administrator has disabled public write access.

How to set-up DDRC-2D to avoid filters / pass-thru 5 days 6 hours ago #34248

  • zydeco
  • zydeco's Avatar
  • Offline
  • Junior Boarder
  • Posts: 23
  • Thank you received: 1
  • Karma: 0
pstrisik wrote:
You can set it up including filters and just turn on and off DiracLive correction.

Does that mean that I need to go through the measurement process and then turn off DiracLive correction? (I'd be hoping to install the unit and set in pass-through mode until there is a time when I can muck around with the measurements.)
The administrator has disabled public write access.

How to set-up DDRC-2D to avoid filters / pass-thru 5 days 6 hours ago #34249

  • pstrisik
  • pstrisik's Avatar
  • Online
  • Fresh Boarder
  • Posts: 17
  • Thank you received: 3
  • Karma: 1
I wouldn't think so. If you install it physically, just make sure DL is off and it should be functioning with pass through. You might go ahead and connect to it with the DDRC utility and look at the settings. I'm not sure about the gain setting - what is unity? Max it out when not using filters?

Experts, correct me if I'm wrong.
The administrator has disabled public write access.
The following user(s) said Thank You: zydeco

How to set-up DDRC-2D to avoid filters / pass-thru 4 days 20 hours ago #34260

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2816
  • Thank you received: 1186
  • Karma: 119
I'd have thought it would work if you just do a reset to defaults. @zydeco you could just try it? :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: zydeco

How to set-up DDRC-2D to avoid filters / pass-thru 3 days 22 hours ago #34277

  • zydeco
  • zydeco's Avatar
  • Offline
  • Junior Boarder
  • Posts: 23
  • Thank you received: 1
  • Karma: 0
john.reekie wrote:
I'd have thought it would work if you just do a reset to defaults. @zydeco you could just try it? :)

Yes, it worked. All a bit strange as I'd tried this earlier but, redoing all the interconnects, returning the DDRC-2D to defaults and then playing music worked.
The administrator has disabled public write access.
Time to create page: 0.148 seconds