Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Load FIR to ddrc-22a?

Load FIR to ddrc-22a? 3 weeks 4 days ago #33818

  • otherones
  • otherones's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 13
  • Thank you received: 1
  • Karma: 0
Is it possible to load a non-DIRAC filter (FIR/convolution) to the 22A?
The administrator has disabled public write access.

Load FIR to ddrc-22a? 3 weeks 2 days ago #33826

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2816
  • Thank you received: 1186
  • Karma: 119
I think it's possible to load the OpenDRC firmware onto the DDRC-22A and load FIR filters that way. However, it's an expensive way to get an OpenDRC-22A. If you were going to do that, best to check with miniDSP support first.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
Last Edit: 3 weeks 2 days ago by john.reekie.
The administrator has disabled public write access.

Load FIR to ddrc-22a? 2 weeks 2 days ago #34029

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5983
  • Thank you received: 728
  • Karma: 132
@ otherones

As correctly mentioned by John, from the point on you are looking to build your own FIR/IIR filter, it's an OpenDRC.
Its indeed possible to downgrade a DDRC-22A to an OpenDRC by loading the firmware and using the plugin fo the OpenDRC2x2. You won't have access to Dirac under that configuration though.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.115 seconds