Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: USB to DDRC-88D AES/EBU

USB to DDRC-88D AES/EBU 1 week 2 days ago #33589

  • Justauby
  • Justauby's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I'm wanting to go active crossovers and run Dirac with a DDRC-88D. I have some coaxial drivers and 2 subs for a total of 6 channels. My only source i use is Tidal playing on my pc through a USB output. My question is what would be the easiest way to get from USB output to the AES/EBU connections on the DDRC-88D? Thanks.
The administrator has disabled public write access.

USB to DDRC-88D AES/EBU 1 week 22 hours ago #33610

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5906
  • Thank you received: 715
  • Karma: 131
@ Justauby
Easiest would be to grab a USB to AES_EBU interface. There are quite few out there (google for one that is closest to you).
This way you can easily stream audio to the DDRC-88D. :-)

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

USB to DDRC-88D AES/EBU 1 week 7 hours ago #33625

  • DynaMick Audio
  • DynaMick Audio's Avatar
  • Offline
  • Junior Boarder
  • Posts: 23
  • Thank you received: 2
  • Karma: -4
Another option is to use the DDRC22D and a OpenDRC-DA8 linked via spdif which would give you stereo sound at 96k instead of just 48k. Check out the USB Streamer www.minidsp.com/products/usb-audio-interface/usbstreamer-box

This solution may be better and cheaper than the one proposed by DevTeam.
Dan Mick
Loudspeaker and Acoustics Guru
The administrator has disabled public write access.
Time to create page: 0.101 seconds