Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username? Create an account
Forum
Community Support
Dirac Series
DDRC-22D Not working - Dirac Live Led is blinking
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: DDRC-22D Not working - Dirac Live Led is blinking

DDRC-22D Not working - Dirac Live Led is blinking 2 months 2 weeks ago #32124

  • Happajoe
  • Happajoe's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hello

First, my english is not the best ... :)

I got my DDRC-22D today and had no problems with setup. I know Dirac Live from the Mac - Version.
After installing and measurement i left my home and took the DDRC-22D from Power.

When i came home again, i put it on ... and The Dirac Live LED in Front was " blinking ".
No Sound !
I put my auralic aries mini with spdif ( coax ) into the DDRC-22d , and from the DDRC i go with Spdif into my Oppo bdp 105 .

I tried several thing :
In the DDRC Utility Program i did a firmware upgrade ... successfully .. but the dirac LED blinks ... no sound
When i press the " refresh dsp " and " restore all to default " .... nothing happens. If i click on " restore all to default " nothing happens .. like freezing.

Can anybody help me ? Is my DDRC-22D damaged ?? :-(

Greets, Christian
The administrator has disabled public write access.

DDRC-22D Not working - Dirac Live Led is blinking 2 months 2 weeks ago #32127

  • Happajoe
  • Happajoe's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hi, the Problem is solved, but dont know really why...?

In the Utility Program the " restore all to default " button worked finally...although it did not many times before...

One question :
I want to set the attenuation in the utility program set to -6 instead of -10, but it doesnt save.
Everytime i connect again to the utility, it's -10 dB again.... ?
How can i Save this ?
The administrator has disabled public write access.

DDRC-22D Not working - Dirac Live Led is blinking 2 months 1 week ago #32144

  • grosso
  • grosso's Avatar
  • Offline
  • Expert Boarder
  • Posts: 95
  • Thank you received: 27
  • Karma: 0
I think it resets the default level itself every time you link the plugin.
I’m not sure though, but on power off/on it doesn't reset mine, when it does if I connect it.
The administrator has disabled public write access.

DDRC-22D Not working - Dirac Live Led is blinking 2 months 1 week ago #32215

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5759
  • Thank you received: 705
  • Karma: 132
@ Happajoe

Not sure what could be the reason but could be the DSP software got corrupted when loading the reloading DSP binary. Blinking LED state.
Feel free to start a tech support ticket (support.minidsp.com) if you have any questions.

AS for the -10dB, it's not read out. it's only a ONE time setup. i.e. when you select it, it's configured as such. If you select -10dB and click RESTORE TO DEFAULT, it will hardcode to -10dB attenuation. Knowing you've got a DDRC_22D, i would "strongly" recommend that you keep it at -10dB. Moving it to 0dB attenuation (no headroom for boost in Dirac) isn't a good idea I think.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Forum
Community Support
Dirac Series
DDRC-22D Not working - Dirac Live Led is blinking
Time to create page: 0.107 seconds