Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Correct Measurement

Correct Measurement 2 months 2 weeks ago #32084

  • Nidary
  • Nidary's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 11
  • Thank you received: 3
  • Karma: 0
Hi Guys, i really love my DDRC88BM :)

but i wonder wheater i did everything right :woohoo:

I actually want to know, whats the correct procedure for the Dirac Measurement.
do i have to make the LFE Mgt in the Minidsp software and then do the Dirac Check
or do i have to make the dirac Check without any settings and put the HPF and LPF afterwards?


when you do the HPF and LPF and then the Dirac Calibration, does it want to fill the gaps or realize that i did the 80hz cut

when i do the dirac first and the HPF, LPF anfterwards, am i missing something that was already corrected by dirac :blink:

hope you get what i am wondering ;)
The administrator has disabled public write access.

Correct Measurement 2 months 2 weeks ago #32094

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2689
  • Thank you received: 1097
  • Karma: 110
You do the Dirac Live calibration and then the bass managment. For optimum results use REW or similar to check integration around crossover.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam, Nidary

Correct Measurement 2 months 2 weeks ago #32096

  • Nidary
  • Nidary's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 11
  • Thank you received: 3
  • Karma: 0
thank you for the answer :)

what would happen if you do it the other way round?
The administrator has disabled public write access.

Correct Measurement 2 months 2 weeks ago #32100

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2689
  • Thank you received: 1097
  • Karma: 110
Possibly nothing. Or possibly something. Try it for yourself and see :)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Time to create page: 0.115 seconds