Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: DDRC 88A NO SOUND

DDRC 88A NO SOUND 5 months 4 weeks ago #25765

  • Jeeaton
  • Jeeaton's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Hello All,

I m not able to get any sound at all during the configuration process. No test sweeps at all are being reproduced. Not sure what I am missing.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 4 weeks ago #25766

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 859
  • Karma: 99
Did you set the level on the Output&Levels tab before trying to do a sweep? (Page 26 of manual)
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 4 weeks ago #25767

  • Jeeaton
  • Jeeaton's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Yes, I did set levels. Everything is connected. No getting sound from any of the steps. My there be someway to test the unit to ensure it is working correctly.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 3 weeks ago #25773

  • Jeeaton
  • Jeeaton's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I have 8 analog cables going from the pre pro to 88A and then from there 8 analog cables going to the amplifiers. The microphone is getting a signal. Not able to play any of the test tones. And not getting any play thru from my cable box or Roku.Might the dip switches need to be changed? I have not opened the unit.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 3 weeks ago #25776

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 859
  • Karma: 99
Hi, the DIP switches won't make a difference. All I could suggest is turn off the amps, and in the DDRC-88 utility use the buttons Restore to Defaults and Upgrade DSP program. If that doesn't help, support ticket -> minidsp.desk.com
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 3 weeks ago #25810

  • Jeeaton
  • Jeeaton's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I uninstalled the software and reinstalled. Followed everything in the manual step by step. Still not able to get sound out of any of the steps. I noticed my microphone is 18db not 12 like in the instructions. I downloaded the correct file for the microphone. Still no luck. I have tried every sub port on my machine. I also followed all suggestions thus far. Any more things to try?
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 3 weeks ago #25812

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 859
  • Karma: 99
Beats me. minidsp.desk.com is where you open a support ticket.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

DDRC 88A NO SOUND 5 months 3 weeks ago #25848

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5108
  • Thank you received: 632
  • Karma: 119
@ Jeeaton,

Sounds like you already started a tech support tick which our team replied to. Please keep following up with them to see what could be the issue here.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 1 week ago #26217

  • astr0b0y
  • astr0b0y's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 10
  • Thank you received: 2
  • Karma: 0
I have the very same issue - did this get resolved?
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 1 week ago #26236

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5108
  • Thank you received: 632
  • Karma: 119
@ astr0b0y

Sounds like you already have a tech support ticket ongoing? If so, easiest to just limit communication to one path. It will make our task very hard to combine help on both. Thanks much for your understanding. :-)

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 1 week ago #26237

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5108
  • Thank you received: 632
  • Karma: 119
@ Jeeaton

Our team is telling me that they didn't hear back from you on our last tech support ticket.
Can you please follow up through the active tech support ticket? Thanks.
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

DDRC 88A NO SOUND 5 months 1 week ago #26244

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5108
  • Thank you received: 632
  • Karma: 119
@ Jeeaton

We'll send you a tech support ticket just in case, but here is an update on what was figured out within today thanks to the help of astr0b0y.
www.minidsp.com/forum/announcements/1225...date-update-required

In other words:
- Check to see if your unit has a green sticker at the back
- If it does, make sure that you upgrade your DDRC-88A utility to v1.7
- Connect, click restore to default and you should be all good.

Please follow your tech support ticket if any questions!

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.155 seconds