Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: All digital DDRC-88A?

All digital DDRC-88A? 9 months 5 days ago #23971

  • tambling
  • tambling's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Any plans to develop an all digital DDRC-88A? (similar to a multichannel version of the DDRC-22D?) We would be VERY interested in this! (so we could use our own converters). Thanks.
The administrator has disabled public write access.

All digital DDRC-88A? 9 months 3 days ago #24001

  • tambling
  • tambling's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Thank you received: 1
  • Karma: 0
Did I post this question in the wrong area?
The administrator has disabled public write access.

All digital DDRC-88A? 9 months 2 days ago #24002

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2286
  • Thank you received: 861
  • Karma: 99
Not sure, but miniDSP don't telegraph what they are working on anyway.

Your question is a bit non-specific. There is an all-digital multichannel Dirac processor already, the nanoAVR DL.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

All digital DDRC-88A? 8 months 4 weeks ago #24099

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5123
  • Thank you received: 632
  • Karma: 119
@tambling

As per John's reply, we indeed don't publicize future products, our roadmap or any XYZ technology we're going to go after.. Most important for the good of our customer base as new platforms may take up to 6months of R&D, we just don't want to set expectations. It's the wrong way for both our customers and our engineering team (under the pressure to release the product) . Hence I'm afraid that we can't help on this question..

Maybe the nanoAVR DL could help your application?

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.101 seconds