Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Calibration file for the UMIK

Calibration file for the UMIK 9 months 2 weeks ago #23726

  • JONTRE
  • JONTRE's Avatar
  • Offline
  • Junior Boarder
  • Posts: 21
  • Karma: 0
I finally got everything to work with my DDRC-88A. Just having a lot thoughts on the UMIK calibrationfile. I´ve got my main speakers above my screen. So they are even higher then the surround wich is placed 60cm above ear level.

Either the 0 degree calibration or the 90 degree calibration file will be optimal. A 45 degree file would be better for me. Is there anyway I can the this solved? Or is the very small changes in these files so I wont be able to hear any difference?

Which file would be the best choice if the speakers are 45 degrees relative to microphone?
The administrator has disabled public write access.

Calibration file for the UMIK 9 months 2 weeks ago #23729

  • john.reekie
  • john.reekie's Avatar
  • Offline
  • Platinum Boarder
  • Posts: 2287
  • Thank you received: 863
  • Karma: 99
ALL of the speakers are 45 degrees wrt the microphone?

There is a program available that will generate a 45 degree calibration file. I forget the details but you can try a search, it's here somewhere...

Failing that, I'd be inclined to use the 90 degree file anyway. You can adjust the target curve if desired, in this case shelve it a little above 10 kHz.
I am not miniDSP support.

"You must ask the right questions." - Dr. Alfred Lanning's hologram.
-> Have you read the User Manual??
-> Have you drawn and posted a diagram?
-> Have you posted a screenshot?
-> Have you posted your config file?
The administrator has disabled public write access.
The following user(s) said Thank You: devteam

Calibration file for the UMIK 9 months 2 weeks ago #23814

  • JONTRE
  • JONTRE's Avatar
  • Offline
  • Junior Boarder
  • Posts: 21
  • Karma: 0
yes alla speakers at the same height. The angle is varies a bit pretty close.
The administrator has disabled public write access.
Time to create page: 0.103 seconds