Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: 2 Inputs in the DDRC-88A and IR...

2 Inputs in the DDRC-88A and IR... 10 months 2 weeks ago #23170

  • Nidary
  • Nidary's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 9
  • Thank you received: 3
  • Karma: 0
Hello

i have the 88A and want to feed it with my Sonos Connect and my PC

is it possible to use 4 inputs and only 2 outputs?

atm i use a small switch wich combines the connect and my pc in one chinch input at the same time
but the 88A has 8 inputs...

how can i manage that?


i also tried the IR from my Yamaha receiver with the 88A
when i start the DDRC-88 Software it tells me "learned" when i try to use the remote with it
but after closing the programm, the 88A does not switch the channels?
what to do?
Last Edit: 10 months 2 weeks ago by Nidary.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 10 months 2 weeks ago #23206

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
@ Nidary,

Sounds like your application is room correction + matrixing. Right now, on the DSP structure, it's not possible.
However, we're working on the release of the so called "DDRC-88BM" which will provide similar capabilities. I think that it will fit you needs here.

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 10 months 2 weeks ago #23219

  • Nidary
  • Nidary's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 9
  • Thank you received: 3
  • Karma: 0
after my Yamaha Remote didn´t work
i bought a apple remote which is described in the manual, and every time i try to learn it the DDRC-88A it tells me "IR Remote learning failed"
any suggestions?

MiniDSP Ltd
DRC-88
Version v1.6
Firmware 2.17
Last Edit: 10 months 2 weeks ago by Nidary.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 10 months 1 week ago #23288

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
@ Nidary,

You've already asked that question directly to our support team so let us answer here since it's info worthwhile to everybody!

"
- The Apple remote is actually preconfigured (no need to learn it as it will indeed fail).
- To get the Apple remote working you first need to “unlearn” what your unit may have learned.
a) Go to IR learning and connect to the DDRC-88A utility.
b) Click on the “learn” button, and wait (do not flash any IR). You will get an error. But that’s ok.
c) Do the same for all buttons.

Now your unit will support Apple remote by default.
"
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
The following user(s) said Thank You: Nidary

2 Inputs in the DDRC-88A and IR... 10 months 1 week ago #23312

  • Nidary
  • Nidary's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 9
  • Thank you received: 3
  • Karma: 0
very strange but it worked
already several times i reset the ddrc to default and flashed the latest firmware twice
but the remote didnt work

now with this "unlearning" of everything it´s ok :)
thanks a lot !
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 10 months 1 week ago #23347

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
very strange indeed.. heheh :-)
That's just the way you need to "unlearn" an IR command. We'll try in the future to put a "clear IR button" to the GUI to send a command to clear all IR.

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 1 month 1 week ago #28392

  • FSo
  • FSo's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 18
  • Karma: 0
Hi devteam,

i had the same problem and it will be much more helpful when you integrate this information in the manual of the DDRC-XXD (also the Apple remote schema and how to do a reset, etc.) ...
That saves my nerves...

thanks in advance Franz
Last Edit: 1 month 1 week ago by FSo.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 1 month 1 week ago #28423

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
@ Franz

Sorry to hear of this issue. We'll try to see what's required to push this update to the user manual. Thanks for the reminder!

Devteam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

2 Inputs in the DDRC-88A and IR... 1 month 11 hours ago #28641

  • Željko
  • Željko's Avatar
  • Offline
  • Junior Boarder
  • Posts: 34
  • Thank you received: 14
  • Karma: 2
Thanks Nidary and Team for solution !!!!!
The administrator has disabled public write access.
The following user(s) said Thank You: devteam
Time to create page: 0.150 seconds