Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: DDRC-88A as 2.1 configuration

DDRC-88A as 2.1 configuration 9 months 3 weeks ago #22841

  • hendra
  • hendra's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
Dear All,
Currently i have a configuration as a follow:
1 pr Speakers, passive

1 pr Subwoofer passive

1 pr Amplifier for Speakers, monoblock

1 pr Amplifier for Subwoofer, monoblock

I did the auto equalization with REW, and install it into the mini dsp 2x4 ( standard pluggins ), each channel.

i want to use DDRC-88 as the room correction.

My question is, how to set up ?

From MIni DSP 2x4 high output ( speakers parts ) to channel 1,2 input in DDRC-88
From Mini DSP 2x4 low output ( subwoofer parts ) to channel 3,4 input in DDRC-88

And how to do calibration ?
1. activate the peq and xover or all bypass?
2.Doing the auto calibration , 2 set ( 9 times measurement ) for satellite ( main speakers ) and subwoofer ( 9 times measurement ), by putting into the listening seat?

Thanks so much, please help me on this.

The administrator has disabled public write access.

DDRC-88A as 2.1 configuration 9 months 2 weeks ago #22983

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 4988
  • Thank you received: 612
  • Karma: 118
Hello Hendra,

Unfortunately no easy way to do such configuration at the time being but stay tuned for some announcement very soon.
It will fit your needs, :-)

MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.105 seconds