Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: UI bug in DLCT build version 6937

UI bug in DLCT build version 6937 1 year 1 week ago #22393

  • kgoroway
  • kgoroway's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 9
  • Karma: 0
Running all the latest software (DLCT 6937, 1.6, firmware 2.17) [on Windows]

Run DLCT, click proceed, click proceed, click on Test for the left channel, hold the left arrow until you are at -40 db. Turn off the test. Close DLCT (X in upper right corner), and choose "okay" when it warns you that changes will be lost.

Run DLCT, click proceed, click proceed, and take note of what the left channel slider looks like, and what numeric value it shows.

For me, the slider is where I left it (-40db), but the numeric value shows 0.0 db.

Then, select it, and hit the left arrow key, and notice that the displayed value immediately jumps to correspond with what the slider is showing.

It seems that the numeric labels will not display the correct value until the value is changed at least once.
The administrator has disabled public write access.

UI bug in DLCT build version 6937 1 year 5 days ago #22474

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5123
  • Thank you received: 632
  • Karma: 119
@ Kevin,

Already received your tech support ticket and mentioned the below already - Here it is for information sake to the community. :-)
Thanks again for the feedback on sending us these comments.


Hello Kevin,

Thanks for the warning for this. We’re indeed aware of this since we’ve fixed an issue on the DLL/DSP firmware but Dirac has yet to update their software to solve that issue. So we’re just waiting in line to see when they’ll be able to release a next release to solve that issue. As usual, they try to combine multiple bugs before doing any updates. So far it’s the only one. :-)

In the mean time, note that the sliders will always be at the correct position. Just the numeric value is showing a wrong value (i.e. minor bug). As a work around, simply click on the slider and it will “update/Refresh” that value.

Hoping this info helps

Devteam
MiniDSP, building a DIY DSP community one board at a time.
Last Edit: 1 year 5 days ago by devteam.
The administrator has disabled public write access.
Time to create page: 0.159 seconds