Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: Filters does not work on my DDRC-22D

Filters does not work on my DDRC-22D 2 years 1 day ago #16807

  • arossing
  • arossing's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
Hi Devteam,
After I have downloaded a filter in a slot and activate it there is just a tremendous noise. Turning off filter result in musik but without filtrering of course. I have made two separate measurements and created three different filters but the result is the same. The curves shown after measuring looks OK and as expectedd. The filter optimization work well and show a taget and estimated resultat curve. Downloading into free slots work fine. But the result when activating filters is a disaster.

I have been in contact with my dealer in Stockholm but before replacing the unit I test this forum.

Anders
The administrator has disabled public write access.

Filters does not work on my DDRC-22D 2 years 1 day ago #16809

  • devteam
  • devteam's Avatar
  • Online
  • Administrator
  • Posts: 5108
  • Thank you received: 631
  • Karma: 119
Anders,

Sounds odd and could be few things (i.e. overdriving, measurement corrupted) although we've never seen this before.
Best that you create a tech support ticket here: minidsp.desk.com and upload your project file so we can load it inside a unit to see what's the issue here.

Sounds good?

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.

Filters does not work on my DDRC-22D 2 years 1 day ago #16824

  • arossing
  • arossing's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 5
  • Karma: 0
Ok, I will do that later today.
Anders
The administrator has disabled public write access.
Time to create page: 0.111 seconds