Welcome, Guest
Username: Password: Remember me
NOTE: This forum is community powered. Please be mindful that long time community members are here to help as part of a community effort. If you have a specific issue (e.g. hardware, failure), please use our tech support portal (Support menu - > Contact Us). Thanks a lot of your help in making a better community. :-)

TOPIC: 192 kHz support for miniDSP DIRAC?

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15911

  • Snafujg
  • Snafujg's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Today, DIRAC released their latest update that includes 192 kHz support. Will the DIRAC Series from MiniDSP be getting this updated software from DIRAC to support 192 kHz? The limit of only up to 96kHz support has kept me from buying a DDRC-22A. But if it will support 192 kHz soon, that will change my decision.
The administrator has disabled public write access.

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15926

  • tane0019
  • tane0019's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Same here. Should be looking at 192Khz i.s.o. only 96KHz
The administrator has disabled public write access.

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15934

  • ativ
  • ativ's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Karma: 0
this would be nice ...
The administrator has disabled public write access.

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15935

  • tane0019
  • tane0019's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 6
  • Karma: 0
Would also be good/nice to know if the current "hardware" is the limiting factor for the 96KHz ??

Or that in the future, it is possible to flash the device firmware to support up till 192KHz ??
The administrator has disabled public write access.

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15936

  • ativ
  • ativ's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 8
  • Karma: 0
maybe we can start a thread with a wish list of features we'd like to see on the MiniDSP Dirac Series ?
The administrator has disabled public write access.

192 kHz support for miniDSP DIRAC? 2 years 2 months ago #15954

  • devteam
  • devteam's Avatar
  • Offline
  • Administrator
  • Posts: 5108
  • Thank you received: 632
  • Karma: 119
Dear All,

Few things to know:
1) While Dirac is Dirac, these are different software packaging, compiling and commercially are actually considered 2 different products. (i.e. sales wize) So we're not following the same dev cycle I'm afraid.
2) Dirac PC (i.e. using your OS to run filters) and Dirac on a DSP firmware (i.e. DDRC/nanoAVR DL) are complete different beast to upgrade. You see how many software dev there are in the world. There is only a "fraction" of firmware developer and an even smaller, tiny fraction of "DSP firmware" dev. Simple, it's not easy. :-) Dirac code on the PC isn't "portable" to a "DSP chip". Complete different structure.

Bottom line? At this point, no plans in the horizon I'm afraid...

DevTeam
MiniDSP, building a DIY DSP community one board at a time.
The administrator has disabled public write access.
Time to create page: 0.126 seconds