Welcome, Guest
Username: Password: Remember me

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: Digital inputs on different presets CDSP8x12 v2.0

Digital inputs on different presets CDSP8x12 v2.0 4 months 2 weeks ago #44929

  • griba87
  • griba87's Avatar
  • Offline
  • Fresh Boarder
  • Posts: 2
  • Karma: 0
Hello!
I use toslink on one preset, and s / pdif on the other preset.
When changing the digital input channel on one of the presets, the digital input channel changes on the other presets. It would be convenient when the digital input channel for each preset was separate.
I hope this feature will be added in the next firmware.
My firmware v1.4. Thank you!
Last Edit: 4 months 2 weeks ago by griba87.
The administrator has disabled public write access.

Digital inputs on different presets CDSP8x12 v2.0 1 month 3 weeks ago #46537

  • piyush7243
  • piyush7243's Avatar
  • Offline
  • Junior Boarder
  • Posts: 24
  • Thank you received: 2
  • Karma: 0
It would be a great feature . Kindly implement it
The administrator has disabled public write access.

Digital inputs on different presets CDSP8x12 v2.0 1 month 1 week ago #46752

  • piyush7243
  • piyush7243's Avatar
  • Offline
  • Junior Boarder
  • Posts: 24
  • Thank you received: 2
  • Karma: 0
griba87 wrote:
Hello!
I use toslink on one preset, and s / pdif on the other preset.
When changing the digital input channel on one of the presets, the digital input channel changes on the other presets. It would be convenient when the digital input channel for each preset was separate.
I hope this feature will be added in the next firmware.
My firmware v1.4. Thank you!

Researched a bit and found that u can use source button on the infrared remote to switch between toslink and spdif. It works great for me
The administrator has disabled public write access.