Welcome, Guest

NOTE: This is a "Community" forum. Please be mindful that community members are here to help as part of a community effort. We therefore appreciate your effort in keeping this forum a happy place!

If you have a specific issue (e.g. hardware, failure) and want help from our support team, please use our tech support portal (Support menu - > Contact Us).
Thanks a lot of your help in making a better community.

TOPIC: CDSP 8x12 DL Wired & IR remote communication

CDSP 8x12 DL Wired & IR remote communication 9 months 6 days ago #43366

rccotroneo Offline Senior Boarder Posts: 59 Thank you received: 8 Karma: 0	Can the IR remote be used without the wired remote connected? Or, is the IR receiver built into the wired remote which needs to be connected in order for the IR remote to work?
	The administrator has disabled public write access.

CDSP 8x12 DL Wired & IR remote communication 8 months 4 weeks ago #43601

devteam Offline Administrator Posts: 8744 Thank you received: 1118 Karma: 160	@rccotroneo IR remote will only work with the remote control (where IR receiver is) connected. Devteam
	miniDSP, building a DSP community one board at a time. The administrator has disabled public write access.

CDSP 8x12 DL Wired & IR remote communication 5 months 3 days ago #45613

rsqt Offline Fresh Boarder Posts: 8 Karma: 0	Is there a way to control two 8x12? Maybe using WI-DG and App. I use them in my full active home cinema. Thanks
	Last Edit: 5 months 3 days ago by rsqt. The administrator has disabled public write access.

CDSP 8x12 DL Wired & IR remote communication 4 months 2 weeks ago #45815

devteam Offline Administrator Posts: 8744 Thank you received: 1118 Karma: 160	@rsqt I guess that you could use 2 x WIDG and use the IP box field to connect to one unit and then connect to the other unit? That would do the trick I guess... Not super easy though.. DevTeam
	miniDSP, building a DSP community one board at a time. The administrator has disabled public write access.

CDSP 8x12 DL Wired & IR remote communication 4 months 1 week ago #46046

rsqt Offline Fresh Boarder Posts: 8 Karma: 0	Thanks. So it could be possible to use even more than 2 C-DSPs. And if I want to use one C-DSP only for a 2-way DBA (double bass array), ist it possible to use all the taps for the range up to 150Hz on 4 output channels? Or is there only a certain amount of taps for each channel possible? Nice weekend Ralf
	The administrator has disabled public write access.

Forum

Community Support

CDSP series

CDSP 8x12 DL Wired & IR remote communication