Digital crossovers are active crossovers made with a set of filters in a digital signal processors. A low pass, a bandpass and a high pass filter is all you need to build an active three-way box. However, designers still need to be careful with amplitude and phase response of the system at the cut-off frequency of each filter.

With our MiniDSP kits, there will be no need for some fancy calculations or other complex  equations.  The resulting frequency reponse is plotted for you on a graph to make sure you have full control over your crossover. Thanks to the our wide range of filters, you can easily modify your settings with a couple of clicks and reconfigure your system accordingly.